| Home |
| Engine Components |
| Return Policy |
| SAE Adapter Rings |
| Driveline Adapters |
| Transmission Adapters |
3 PIECE - Industrial
STUB SHAFT DRIVEPLATES
|
Stub shaft
driveplates fit SAE depressed center flywheels.
They are designed for use with a flexible coupler to direct
drive auxiliary components. Side
loading requires the use of a pillow block bearing on the shaft end. When placing an order, please use the part number listed below. Auxiliary power products are covered by the Phoenix Casting & Machining Limited Warranty, (see warranty for details). |
 |
| Stub Shaft Driveplates | |||||
| Part Number | SAE Clutch Size | Keyed Shaft | Overall Length | Shaft Diameter | Key Size |
| 26-00168 | 14" | 5.50" | 12.00" | 4.00" | 1.0" |
| 26-00163 | 18" | 5.50" | 1500" | 4.00" | 1.0" |
NOTE: Stub shafts for the 14" clutches and larger are available on a non-stock basis. Special sizes, diameters and shaft lengths (keyed and overall) are available upon request. SAE #3, #4 & #5 Side Load Plates available from stock. Ask your customer service representative for more details.
Phoenix Casting & Machining, Inc.
906 Juniata Avenue | PO Box 308 | Juniata, NE 68955
Phone (402) 751-2135 or Fax (402) 751-2271
E-mail to info@phxgrp.com